DHCP Server
2012/05/29 |
Configure DHCP ( Dynamic Host Configuration Protocol ) Server.
If you make your linux computer DHCP server, it's neccesarry to disable DHCP function on router in LAN.
|
|
[1] | Install and configure DHCP |
[root@dlp ~]#
yum -y install dhcp
[root@dlp ~]#
vi /etc/dhcp/dhcpd.conf # Add lines like below # specify domain name option domain-name "srv.world";
# specify DNS's hostname or IP address option domain-name-servers dlp.srv.world;
# default lease time default-lease-time 600; # max lease time max-lease-time 7200; # this DHCP server to be declared valid authoritative; # specify network address and subnet mask subnet 10.0.0.0 netmask 255.255.255.0 { # specify the range of lease IP address range dynamic-bootp 10.0.0.200 10.0.0.254; # specify broadcast address option broadcast-address 10.0.0.255; # specify default gateway option routers 10.0.0.1; } systemctl start dhcpd.service [root@dlp ~]# systemctl enable dhcpd.service |
[2] | Configure on client. This example is on Windows 7. Open Network settings and go to the sacreen like below. |
[3] | Check boxes like below, then IP address is re-configured automatically. |
[4] | See the network status. Automatical configuration is done. |